Netgear EX2700RP N300 setup

To do the Netgear EX2700RP N300 setup, here is the quick glimpse as mentioned below. For a detailed setup/installation guide to do the Netgear Netgear EX2700RP N300 setup wifi range extender please follow this link: https://my-wifiexts.net/

A quick setup guide to do Netgear EX2700RP N300 setup, Place the extender close to the Wi-Fi router.Netgear ex2700RP N300 setup

  • In the second step of Netgear EX2700RP N300 setup, when you are finished connecting the Wi-Fi router, you can place the extender at its permanent location.
  • In the third step of Netgear EX2700RP N300 setup, Plug the extender into an electrical outlet.

 Note: While doing the Netgear Ex2700RP N300 Setup, Make sure that your computer is not connected to a Wi-Fi network or Ethernet network. If the computer is already connected to a Wi-Fi network or Ethernet network, you might not be able to connect to the extender.

  • In the last step of doing the Netgear EX2700RP N300 setup, Connect your computer to the extender with an Ethernet cable and see your extender light must be in green. Go to www.mywifiext.net, and enter admin for the user name and password for the password.

Above mentioned steps for Netgear Netgear EX2700RP N300 setup, are quick and easy, for a detailed guide/step by step guide to do the Netgear Netgear EX2700RP N300 setup please visit https://my-wifiexts.net/

 

Frequently asked questions (FAQ) about Netgear EX2700RP N300

How to see connected devices to the Netgear EX2700RP N300

Sometimes due to security reasons or by other mean you want to see the connected devices to the extender. To view the same follow the instructions as mentioned below:

  • Use a computer or any wifi enabled device, which is already connected tot he wifi network. ON the device open the web browser. After opening the web browser, please visit: https://my-wifiexts.net/
  • When you will be asked, enter the email address and password. After entering the details as the status page will open. When your browser shows the menu icon with three bars, click on that. After that the extender menu displays.
  • Visit the settings and under settings, you can see the connected devices.

View and modify wifi settings for Extender

  • Use a computer or any wifi enabled device, which is already connected tot he wifi network. ON the device open the web browser. After opening the web browser, please visit: https://my-wifiexts.net/
  • When you will be asked, enter the email address and password. After entering the details as the status page will open. When your browser shows the menu icon with three bars, click on that. After that the extender menu displays.
  • Visit the settings and under settings, you can visit Wifi. From there visit and modify the wifi settings as desired.

How to change the wifi network name for Extender

  • Use a computer or any wifi enabled device, which is already connected tot he wifi network. ON the device open the web browser. After opening the web browser, please visit: https://my-wifiexts.net/
  • When you will be asked, enter the email address and password. After entering the details as the status page will open. When your browser shows the menu icon with three bars, click on that. After that the extender menu displays.
  • Visit the settings and under settings, you can visit Wifi. From there go into Network name (also called SSID), in there type the network name as desired, after entering the details, save the settings by clicking the Save button.

How to create a hidden network and turn off SSID broadcast for Extender

  • Use a computer or any wifi enabled device, which is already connected tot he wifi network. ON the device open the web browser. After opening the web browser, please visit: https://my-wifiexts.net/
  • When you will be asked, enter the email address and password. After entering the details as the status page will open. When your browser shows the menu icon with three bars, click on that. After that the extender menu displays.
  • Visit the settings and under settings, you can visit Wifi. After that uncheck the Broadcast the Network name (SSID). After this save the settings by clicking the Save button.

How to enable or disable wifi radio for Extender

  • Usually, the extender’s wifi radio broadcast the 2.4 GHz band signals. No device can connect to the extender’s wifi network after disabling the wifi radio.
  • Use a computer or any wifi enabled device, which is already connected tot he wifi network. ON the device open the web browser. After opening the web browser, please visit: https://my-wifiexts.net/
  • When you will be asked, enter the email address and password. After entering the details as the status page will open. When your browser shows the menu icon with three bars, click on that. After that the extender menu displays.
  • Visit the settings and under settings, you can visit Wifi.
  • There you will see a box by default checked to Enable 2.4 GHz WiFi. If you want to disable the wifi radio then uncheck it. After this save the settings by clicking the Save button.

How to change wifi speed for Extender

  • Usually, the extender’s wifi radio broadcast the 2.4 GHz band signals. No device can connect to the extender’s wifi network after disabling the wifi radio.
  • Use a computer or any wifi enabled device, which is already connected tot he wifi network. ON the device open the web browser. After opening the web browser, please visit: https://my-wifiexts.net/
  • When you will be asked, enter the email address and password. After entering the details as the status page will open. When your browser shows the menu icon with three bars, click on that. After that the extender menu displays.
  • Visit the settings and under settings, you can visit Wifi.
  • Under the option WIfi speed, select the speed you desired.
  • After this save the settings by clicking the Save button.

Modifying or customizing wifi coverage area for Extender

  • Usually, the extender’s wifi radio broadcast the 2.4 GHz band signals. No device can connect to the extender’s wifi network after disabling the wifi radio.
  • Use a computer or any wifi enabled device, which is already connected tot he wifi network. ON the device open the web browser. After opening the web browser, please visit: https://my-wifiexts.net/
  • When you will be asked, enter the email address and password. After entering the details as the status page will open. When your browser shows the menu icon with three bars, click on that. After that the extender menu displays.
  • From there select the option Do more and after that go into wifi coverage 
  • After that select a radio button for the output power.
  • After this save the settings by clicking the Save button.

Adding the computer to the Extender’s wifi network with WPS

  • with wifi protected setup (WPS), let you connect with extender’s network without having the need to enter the network key. To connect the computer with extender’s wifi network with WPS, use a WPS button or enter a PIN to connect.
  • When using the WPS button, the WiFi device that you are trying to connect must include a physical push button or a software button. If you use the PIN method, you must know the PIN of the WiFi device that you are trying to connect
  • By default, WPS works with WPA and WPA2 WiFi security. If there is no wifi security is set then connecting with WPS automatically sets WPA + WPA2 WiFi security on the extender network and generates a random passphrase. You can view this passphrase on the
    WiFi Settings page

WPS with PIN: 

  • Usually, the extender’s wifi radio broadcast the 2.4 GHz band signals. No device can connect to the extender’s wifi network after disabling the wifi radio.
  • Use a computer or any wifi enabled device, which is already connected tot he wifi network. ON the device open the web browser. After opening the web browser, please visit: https://my-wifiexts.net/
  • When you will be asked, enter the email address and password. After entering the details as the status page will open. When your browser shows the menu icon with three bars, click on that. After that the extender menu displays.
  • From there select the option Do more, and after that go into the connected devices(WPS).
  • When a page displays, choose the PIN Number radio button. In there type the known PIN of the WiFi device in the field. Hit the Next option. After a few minutes go to the WiFi device and use its WPS software to join the WiFi network.

WPS with push button

  • Use a computer or any wifi enabled device, which is already connected tot he wifi network. ON the device open the web browser. After opening the web browser, please visit: https://my-wifiexts.net/
  • When you will be asked, enter the email address and password. After entering the details as the status page will open. When your browser shows the menu icon with three bars, click on that. After that the extender menu displays.
  • From there select the option Do more, and after that go into the connected devices(WPS).
  • Then click on the option WIFI PROTECTED SETUP (WPS) button. After a few minutes, go to the computer or WiFi device and press or click its WPS button.

How to deny access to a particular wifi device or computer

  • Use a computer or any wifi enabled device, which is already connected tot he wifi network. ON the device open the web browser. After opening the web browser, please visit: https://my-wifiexts.net/
  • When you will be asked, enter the email address and password. After entering the details as the status page will open. When your browser shows the menu icon with three bars, click on that. After that the extender menu displays.
  • Visit the settings and under settings, you can see the connected devices. There under the WiFi Devices section, select the Enable Access Control option. Choose the option Deny for the names and MAC addresses of WiFi devices that are connected to the extender.
  • After this save the settings by clicking the Save button

Control Access schedule for the extender

  • Use a computer or any wifi enabled device, which is already connected tot he wifi network. ON the device open the web browser. After opening the web browser, please visit: https://my-wifiexts.net/
  • When you will be asked, enter the email address and password. After entering the details as the status page will open. When your browser shows the menu icon with three bars, click on that. After that the extender menu displays.
  • After this choose Do more and after that go into access schedule. In the Days menu and the Time menu, select the days and time when you want to disable Internet access. In there select the Add time to add the time that you specified to the Scheduled Times table.
  • After this save the settings by clicking the Save button

Here are some other relevant links, you might find interesting: